Have you ever been at your apartment, home, RV, or camper and wanted fresh air coming in? At the same time, you don’t want to take the time or expense to install a screen door (or simply can’t because it’s not your property to alter!) Do you have pets that can’t decide whether they want to stay in or go out? Are you annoyed at insects constantly flying into your place if you leave your door open to get fresh air?
Don’t worry; the Flux Phenom “Magnetic Screen Door” has you covered! Now you can have fresh air, let pets have their freedom, and not have to worry about those pesky insects all at the same time!
How does the Flux Phenom Magnetic Screen Door work?
The Flux Phenom Magnetic Screen Door, as the name implies, is an easy-to-install magnetic door screen. When you or your pets exit the screen door, the magnets seal the door behind you. No more worrying about quickly turning around to ensure the door’s closed – it closes and seals automatically does it on its own! The self-closing mechanism means you don’t have to worry about insects entering your house, apartment, RV, or camper.
Who can use the Flux Phenom Magnetic Screen Door?
- Those with toddlers
- People with excitable dogs
- Those with free-roaming cats
- People who are potty training their dogs
- Those who want to let fresh air in their place
- Anyone who doesn’t wish to deal with insects in their house
- Those who want to avoid using harsh chemicals to kill insects
- People who don’t want to change the outside of their property
- Individuals who don’t want to worry about constantly closing a screen door
- Literally, anyone who has an exterior, sliding glass, porch, RV, or camper door
How to Install the Flux Phenom Magnetic Screen Door?
The Flux Phenom Magnetic Screen Door is pretty straightforward to install.
Items needed:
- Hammer
- Tacks/ pushpins (if used on wood)
- Staples/ clips (if using on vinyl or aluminum)
- Scissors (if used on vinyl or aluminum)
- A short stool or ladder, depending on the user’s height
- if you have a second person to assist, it would be helpful.
First, clean the door frame and wipe it dry. Dust, dirt, or debris between the door and the frame may make the door less effective.
Then, lay the Flux Phenom Magnetic Screen Door flat and align the magnets. Failure to perform this step may make the screen door work improperly.
Next, hold the screen to the top of the doorframe. The bottom of the Flux Phenom Magnetic Screen Door should be about ¼” from the ground, floor, porch, etc. If the screen door is too close to the ground, you need to hem it.
Hemming the top of the Flux Phenom Magnetic Screen Door
- As you hold the screen door, look where the screen door seam allows for ¼” clearance from the ground. Place your finger there. If you have another person, it would be helpful for them to do this for you instead of you having to hold it up and figure out where the seam is simultaneously.
- Fold the screen at the seam inward to ensure that you’re not exposing the velcro.
- “Tack” through both layers to secure along the total length of the screen, making sure it’s even. Use thumbtacks if you’re doing this for wood; use staples or clips to perform the same task for other surfaces.
Hemming the side(s) of the Flux Phenom Magnetic Screen Door
- Like hemming the Flux Phenom Magnetic Screen Door at the top, look for where the screen door rests about 2” from the frame’s corner. Place your finger there. If you have another person, it would be helpful for them to do this for you instead of having to hold it up and figure out where to fold the screen door for the hem simultaneously.
- Fold the screen door inward at the point you marked, ensuring you’re not exposing the velcro. You can fold the screen more than once to accomplish this.
- “Tack” through both layers to secure along the total length of the screen, making sure it’s even. Use thumbtacks if you’re doing this for wood; use staples or clips to perform the same task for other surfaces.
Finally, use the velcro or tacks to secure the Flux Phenom Magnetic Screen Door to the doorframe, adhering velcro to the frame if you’re using it on vinyl or aluminum.
With all these benefits and an easy-to-install magnetic door screen from the Flux Phenom, why would you hesitate? Order yours today!
Flux Phenom Magnetic Screen Door Details
Product details
Color: Black
Item Material: Polyester Mesh
Item Dimensions (L X W X H): 11” X 15.25” X 2”
Fit dimensions: Fits all doors 38” X 82”
Item Weight: Less than 1 lb (0.65 lbs / 10.4 oz.)
Manufacturer Retail Price: $21.95
Free returns? Yes
Free shipping offered? on orders > $25.00
